R panel roofing vs. standing seam

29

Sep

R panel roofing vs. standing seam

The article will dwell upon the difference of R panel roofing vs standing seam. When constructing a new home or replacing a roof there is always a question: what type of materials to use for the roof? R panel and standing seam panels are often thought to have similar properties and installation principle. Below we will try to explain the up- and downsides of this or that choice.

Let’s wedge between these two terms

In a nutshell, R panels are metal sheets with the length that ranges from 3’ to 36’. These sheets are used for cladding the walls or on the rooftops. They are mainly used on agricultural or commercial buildings, seldom they can be found on residential structures.

As for the standing seam panels, these are sheets of a various width and length that are installed vertically. There prominent feature is a standing seam which interlocks panels with one another without applying drilling or screws. This type of covering is found on residential, commercial, agricultural, – practically any kind of structures.

The analysis of main properties

We will analyze these materials regarding their main qualities: reliability, cost and installation speed. After this analysis, it will be much easier to decide which type of covering to choose!

	R panels	Standing seam
Reliability	The danger of leakage arises, because the installation of R panels requires drilling holes. Also, the fasteners on r panels should be checked for tightness every five to seven years.	In practical terms it is the lifespan that makes standing seam such a good choice for rooftop. This is partially explained by the usage of concealed fasteners that leaves no chance for the water to penetrate the surface. Plus, the junction of seams is so steadfast, that maintenance of the roof comes down to mere water hose.
Cost	R panels are widely available and easy on the pocket. This is exactly what constitutes their main advantage. Cost of R panels with installation boils down to $5-8 for square foot.	For most applications, however, the greater cost and installation time of standing seam roofing is an reasonable compromise for the many upsides of standing seam panels. The installation of standing seam metal roof comes to $12-20 for square foot.
Installation speed	The sheets are installed with fasteners that penetrate the panel and attached to the substrate or structural elements below. R-panels are quick and easy to install with exposed fasteners: they do not require meticulous attention to the details or narrowly defined skills.	Standing seam systems are comparatively fast to install using concealed clips and fasteners. This is fairly narrow professional job that requires skill and accuracy.

As you see, R panels and standing seam panels have found their way in completely different applications. With that said, it is worthwhile to note that the final decision on rooftop is up to the owner’s priorities and budget. If it is important to have inexpensive simple and quick option, then R panels are the best solution. However, if the aesthetics and durability come into play, then it is better to set the sights on standing seam roof.

Reach us at +1 647 997 70 84 or fill in the form online to get your roof estimate.